Soundman2020 - Studio Design Forum

IMG_4376.jpg IMG_4331.jpg C998464B-F076-404B-8382-483D602724F4_1_105_c.jpeg 3F9D613F-AB06-4FB5-BD31-21DFC039F361_1_105_c.jpeg 4D1D3FA6-62F3-4CD9-9FAB-2EEA7E5EC0ED_1_105_c.jpeg 7A6E42C2-6F1E-4A46-A888-8833471EB840_1_105_c.jpeg 43B8EC72-1F27-499B-B61C-6AAFCE31F3C1_1_105_c.jpeg 98FC9756-32CB-427E-B74B...

5368 You could install a trap similar to what you have on your rear wall in your control room across one wall, then do some soffit traps all the way around the top of the walls/ceiling - this way you don't use floor space but have some nice broad control down to 100hz or so (depending on depth of t...

5367 Getting the low frequencies less resonant will be a massive help for acoustic drums in the room. I speak from experience - I record drums at the back of my control room, sometimes with other musicians in the same room. Everyone is on headphones, and it's been fine. I'd say the way to go is dee...

Priority before the next rock band records is to build some bass traps..... I remember their was some good designs on this forum somewhere... I will search.... I have some leftover rockwool but do not know if the density measurements are on the bag or not..

Sept 5-11th, we had the first real massive studio session using almost all the channels (22) and this included 3 guitar set ups (Fender, Orange, Marshall), bass (Ampeg), full drum kit, congas, bongos, 9 channels of keyboards and one room mic in the ceiling. We left all the mics on even if only some ...

IT is one of my bands called Doctors of Space...

https://www.dropbox.com/s/2nlzk2brvs8sre2/DOS%20Jam%203%20Mix2.mp3?dl=0 This is a recording from our first session in the studio.. Drum machine, guitar, bass and synths.. Enjoy if you have the patience to listen to this 27min improvised piece.. Everything is working great now. Only have to get a few...

We had the first recording session today with LUNA and it went pretty well. 5 Jams between 20 and 40mins long were recorded successfully. Next step is some mixing but the recording directly to the Neve 1073 UAD plug in on all channels sounded great. Used the Studer tape plug in as well on some of th...

For sure I will... Have some recording projects in June when I am back from tour.....

I am happy to say that my studio is complete now... I guess studios are never really finished as you are always adding, getting new gear, fine tuning, etc.. but the basic studio is finished now. This has been a very long journey. Stuart made the basic design for my studio about 5 years ago and the f...

It appears to be a software issue in the UAD console that I need to configure.. I am working on it... Sorry folks..

Hello... I have an Apollo QUAD and newer Apollo 16. I am having trouble to interface these with the SPL 2489 Surround monitor control. I have the audio going out of the X16 via a db25 cable into the input of the surround mixer. The sound speakers are all connected to the SPL unit output channels. I ...

[quote="endorka"] 5088 Lovely stuff. Are the speaker stands filled with sand or something like that? NO but they are pieces of the laminated beams for the ceiling so they are damn heavy.. 30kg each or something.. And you have a full Trace Elliot stack! Amazing! :yahoo: I have a 4x10 Trace ...

Joules was here the last few days and we got all the patch bay tested and it all works and the outboard gear is in but sadly, one of my db25 8 channel cables was too short to get the ASP880 (2nd one) fully connected and also the Mac Mini required a cable (USB-C to thunderbolt 2), that prevented us f...

We will have some lamps for ambience for sure.. Where can I get a huge lava lamp. I am up for that. As for the panels, they are absorptive and each one is tuned slightly differently so you can move them around to change the sound of the room as you need. I still need some gobos and small carpets.. S...