Building Studio 45 - My Home Based Studio

Document your build here: All about your walls, ceilings, doors, windows, HVAC, and (gasp!) floated floors...
User avatar
endorka
Full Member
Posts: 168
Joined: Mon, 2019-Sep-23, 06:36
Location: Scotland
Contact:

Building Studio 45 - My Home Based Studio

#16

Postby endorka » Thu, 2020-Jul-30, 19:52

Studio45 wrote:Thanks Jennifer! Much appreciated! I have to say, your build thread is pretty darn impressive and amazing! I'm far from being at the same stage you are but I can't wait to get into it!


Thank you :-) I'm looking forward to hearing how you get on with the angled ceilings. While they can make acoustic calculations, predictions and modelling difficult, I've found them useful as long as I work to their advantages. They are incredibly useful for recording, for example. Even with minimal treatment the rooms can give recordings that somehow seem more spacious than the room they were recorded in, and in a very pleasant way.

Cheers!
Jennifer



Studio45
Active Member
Posts: 18
Joined: Wed, 2020-May-13, 11:13
Location: Ontario, Ottawa

Building Studio 45 - My Home Based Studio

#17

Postby Studio45 » Fri, 2020-Jul-31, 23:03

endorka wrote:
Studio45 wrote:Thanks Jennifer! Much appreciated! I have to say, your build thread is pretty darn impressive and amazing! I'm far from being at the same stage you are but I can't wait to get into it!


Thank you :-) I'm looking forward to hearing how you get on with the angled ceilings. While they can make acoustic calculations, predictions and modelling difficult, I've found them useful as long as I work to their advantages. They are incredibly useful for recording, for example. Even with minimal treatment the rooms can give recordings that somehow seem more spacious than the room they were recorded in, and in a very pleasant way.

Cheers!
Jennifer


Yes! I'm pretty excited about getting there as well. It's coming soon! I've got a bit more insulation to put up against the ceiling before I start framing the control room. I've got it all planned out. I'm trying my best to work on my Sketchup model so I can show what I'm going to do. I'm starting with the Control Room and I decided I will be doing inside/out ceilings and walls. I look forward in doing some readings once it's all framed and done. :)

Francis,



Studio45
Active Member
Posts: 18
Joined: Wed, 2020-May-13, 11:13
Location: Ontario, Ottawa

Building Studio 45 - My Home Based Studio

#18

Postby Studio45 » Fri, 2020-Jul-31, 23:17

Hey Everyone, happy Friday. Here's a bit more progress I've done on re-installing the structural box and HVAC main trunk.
S45-HV-1.jpg
S45-HV-2.jpg
S45-HV-3.jpg
S45-HV-4.JPG
S45-HV-5.jpg
S45-HV-10.jpg
S45-HV-11.jpg
S45-HV-12.jpg
S45-HV-13.jpg
S45-HV-14.jpg
S45-HV-15.jpg
S45-HV-16.jpg
S45-HV-17.jpg
S45-HV-18.jpg

S45-HV-19.jpg
S45-HV-20.jpg

I'm using a 3" ABS conduit to run/fish any additional wires back to the live room once I'm done.
S45-HV-21.jpg



Studio45
Active Member
Posts: 18
Joined: Wed, 2020-May-13, 11:13
Location: Ontario, Ottawa

Building Studio 45 - My Home Based Studio

#19

Postby Studio45 » Sat, 2020-Aug-01, 11:11

Here's some more progress made on hanging some more insulation around the silencer boxes. Coming along nicely, and hope to start framing the control room soon. :D
S45-DW-1.jpg
S45-DW-2.jpg
S45-DW-3.jpg
S45-DW-4.jpg
S45-DW-5.jpg
S45-DW-6.jpg
S45-DW-7.jpg
S45-DW-8.jpg
S45-DW-9.jpg
S45-DW-10.jpg
S45-DW-11.jpg
S45-DW-12.JPG
S45-DW-13.JPG
S45-DW-14.JPG
S45-DW-15.JPG
S45-DW-16.JPG
S45-DW-17.JPG
S45-DW-18.JPG



User avatar
Starlight
Full Member
Posts: 124
Joined: Wed, 2019-Sep-25, 12:52
Location: UK & Slovakia, Europe

Building Studio 45 - My Home Based Studio

#20

Postby Starlight » Sat, 2020-Aug-01, 14:29

Image
I see the inspector is on-site: tail wagging means you are doing a good job; barking means you made a mistake.

I am working with my baffle boxes and knowing how small they are compared to yours and yet how heavy they are I am really impressed at your work to raise and secure yours. If you can hear me I am applauding!



Studio45
Active Member
Posts: 18
Joined: Wed, 2020-May-13, 11:13
Location: Ontario, Ottawa

Building Studio 45 - My Home Based Studio

#21

Postby Studio45 » Sun, 2020-Aug-02, 13:21

Starlight wrote:I am working with my baffle boxes and knowing how small they are compared to yours and yet how heavy they are I am really impressed at your work to raise and secure yours. If you can hear me I am applauding!


Thank You!! Much appreciated! I tried to come up with a few other ways but always kept going back to that hehe. Hope your baffle boxes come out good :). I didn't feel like build multiple ones and figured I could use some of that extra space at the top. I hope it all works out in the end.

And yes!! of course the inspector is always nearby watching closely haha.

Cheers!

Francis,




  • Similar Topics
    Statistics
    Last post

Who is online

Users browsing this forum: No registered users and 7 guests